You are here

Multiple MySQL Instances on a Single Machine

Typically, on a single machine (be it a physical or a virtual one) only a single MySQL instance (process) is running. This is perfectly ok for all those situations where a single instance is sufficient, like for storing small amounts of data (RedHat using MySQL for postfix, KDE using it for akonadi, ...), as well as those where a dedicated machine per MySQL instance is appropriate (high CPU load, memory fully loaded, availability requirements).

But there are also those users who want to (or would like to) have multiple instances which would still fit into a single machine. Even among them, a single instance per machine is typical. For this, there are good reasons:

  • MySQL comes with defaults for files (config file, error log, ...) and directories (data directory, binlogs, ...) which would cause conflicts between multiple instances (unless they are changed).
  • The scripts coming with MySQL, especially the automated start/stop with machine reboot/shutdown, are written for a single instance only.
  • Last but not least: The instructions. those in the manual as well as the many "How to setup ..." in the Web, cover a single instance only.
Because of this, users often either restrict themselves to a single instance, or they set up several virtual machines (or containers) holding a single instance each.

But that overhead (both in software and in labour) isn't necessary: There is a way out, supporting easy handling of multiple MySQL instances on a single machine directly, without containers or VMs. This is our "MyEnv" package, available for download here, licensed under the GPL.

What Does MyEnv Do?

MyEnv cares about two aspects which in combination provide easy use of multiple instances:

  • It helps to configure multiple MySQL instances without overlap, so they won't collide with each other.
  • It maintains separate environments, each to manage and access one specific instance.

Each environment contains the path to the binaries (so the instances can use different versions), the config file, the socket and port number, data directory, error log etc. The environment is specified by a name (choose a meaningful one!), and it is switched by using its name as a shell command. (MyEnv creates an alias for that.)

Administrative commands like "start" and "stop" will manage the instance of the current environment. MySQL client programs like "mysql" or "mysqldump" will access that instance.

MyEnv supports the autostart of instances at machine boot, configurable per instance - something which is impossible using only the tools of a MySQL distribution.

Of course, an instance started via MyEnv (either manually or via autostart) can be accessed by any other client program on the machine, or from any other machine in the network - all that is needed is the specification of the proper socket or network port.

Handling Multiple Binaries

In the previous section, I wrote the instances can use different versions. This is done by installing those different versions into different locations, controlled by MyEnv, and the directory with the binaries will become a component of the user's PATH variable, switched when the environment is switched. Obviously, this works only if the destination path of the installation can be controlled, which implies the tar.gz format - RPM or DEB packages have fixed destinations, so different versions would overwrite each other on installation.
But that is no severe limitation, as all MySQL versions are available in tar.gz format, and these are sufficiently generic to run on any reasonably current Linux distribution.
(Yes, that is something I forgot to mention: MyEnv is developed and tested on Linux only. You are welcome to try it on any other Unix platform, and we will gladly listen to your experiences and accept your contributions, but we do not actively pursue non-Linux platforms.)

This support for multiple versions makes MyEnv the perfect tool for application development: Using a single machine, you can let your application access the MySQL servers of different versions and can verify it works the way you want it to.

Similar, you can install binaries of MySQL (Oracle), Percona Server, or MariaDB, and verify your application is portable across them.

And the adventurous among us can use different binaries, from the same or different vendor(s), to test whether replication works across versions and/or vendors, all without the effort of installing a separate VM or container setup.

MyEnv and Galera Cluster

Till now, I mentioned MySQL (and its variants), and many readers may associate that term with a traditional single instance. So I better state explicitly: Of course, such an instance can take part in replication, in any role: master, slave, or intermediate in multi-level replication.

But besides single instances and replication, there exists a different MySQL setup: Nodes combined to form a Galera Cluster. And again, let me state explicitly: Again of course, an instance controlled by MyEnv can be a node participating in a Galera Cluster.

Those readers who have experiance with Galera Cluster (or who have just read the documentation or blogs about it) know that to start the first node of a cluster a special command is needed, called "bootstrap" - a simple "start" will not do. So this command was also added to MyEnv, it can manage a Galera Cluster completely by its builtin commands.

RPM and DEB packages

Above, I wrote that to install different versions you cannot use RPM or DEB packages. I did not write that MyEnv cannot use RPM or DEB - in fact it can, the absolute path names in these formats just limit this to a single version.

So you can install the RPM or DEB of your choice, disable its autostart, and then call MyEnv to create multiple instances. You will give them different names, specify different sockets and ports and use different data directories, but for all of them you will specify the same path "/usr". As a result, MyEnv will simply manage multiple instances of the same version.

You can configure them differently to test the consequences, or you can set them up to replicate among them - master and slave can run on the same machine. Of course, this will not give you the "high availability" or the "scale-out" benefits which are the typical reasons to use replication, but I trust this wasn't your purpose for this test.

Using binaries that include Galera, and configuring them properly, you can even run all nodes of a Galera Cluster as separate instances on a single machine. That may be considered to stretch the concept, because a single machine is a very different setup than separate machines, but it gives an idea of the possibilities opened by MyEnv.

Typical Use of MyEnv

Admitted: The claim to know what MyEnv is used for by others would be arrogant, and I do not uphold it. Nonetheless, we do know some use cases of people who downloaded MyEnv, and they are close to our internal use of the tool.

MyEnv allows to have multiple MySQL instances on the same machine, to manage them separately, and to access them using MySQL client programs or other applications. So it is the perfect setup for all those who need to access different versions: developers and software testers.

When we encounter some unexpected behaviour, we often want to know whether it is specific to some version or series, or is widespread. To check that, MyEnv is the perfect infrastructure: You write a test case to provoke the effect and run it on several versions, then you note the result and can tell whether it exists "since ages" or is new, whether it still occurs in current versions or will change with an upgrade - exactly the information you need to decide about an upgrade or write a bug report.

Database administrators and application developers use it to avoid nasty surprises with new versions, so their production instances will not suffer from unexpected functional changes. Setting up a test environment, especially for multiple versions, becomes cheap, much less ressources are needed. You don't need to copy your test code onto different machines, and you are sure you are running identical tests, so that you won't compare apples and oranges.


If all that made you curious, I invite you to look into the instructions, to download MyEnv and to try it. And of course, your feedback and reports are very welcome.

Take care!

Appendix: Where to Meet Us

All FromDual colleagues will deliver talks at the FrOSCon in St. Augustin near Cologne, Germany, on August 20 and 21, so that is a good opportunity for personal contact. As several talks will be delivered in English, the conference also meets the needs of attendants who cannot follow a German talk - check the programme. Froscon is a famous event, very interesting talks are promised, and I look forward to enjoy the community atmosphere there.

I will deliver a talk at the "Open Source Backup Conference" in Cologne, Germany, on September 26 and 27; this conference is held in English.

I do not have feedback yet about Percona Live in Amsterdam, I may attend that also.

And finally, FromDual will again have a booth and deliver talks at the DOAG conference on November 15 - 18 in Nuremberg, Germany. This is "the" event for Oracle users (at least in Germany, maybe in all Europe), and it has a separate track dealing with MySQL only.

We will be delighted to meet you face to face!

Taxonomy upgrade extras: